
1150 LCD panel, LCD cable and hinges
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Dummy card” on page 35
• “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 36
• “1040 Hard disk drive” on page 37
• “1050 DIMM” on page 38
• “1060 PCI Express Mini Card for wireless LAN” on page 39
• “1070 Keyboard” on page 41
• “1080 Keyboard bezel” on page 43
• “1090 System board” on page 48
• “1100 LCD unit” on page 51
• “1140 LCD front bezel” on page 60
Figure 16. Removal steps of LCD panel, LCD cable and hinges
Remove four screws
1
and two screws
2
. Remove the integrated camera
connector in the direction shown by arrow
3
. Lift the LCD panel in the direction
shown by arrows
4
.
When installing: Make sure that the connector is attached rmly.
Step Screw (quantity) Color Torque
1
M2 × 3 mm, at-head, nylok-coated (4) White 1.6 kgfcm
2
M2 × 3 mm, at-head, nylok-coated (2) Black 1.6 kgfcm
Comentarios a estos manuales