
47
Lenovo Y70-70 Touch/Y70-80 Touch
1100
System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• During the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• “1010 Base cover” on page 33
•
“1020Batterypack”onpage35
• “1030Harddiskdrive”onpage37
• “1040PCIExpressMiniCardforwirelessLAN”onpage39
• “1060LEDboard”onpage42
• “1070Subwoofer”onpage43
• “1080USBboard”onpage44
• “1090FanassemblyandHeatSinkassembly”onpage45
Figure 10. Removal steps of system board
Disconnect the connectors in the direction shown by arrows
1
,
2
and
3
.
Remove the screws
4
.
4
4
4
4
4
4
4
3
2
2
1
1
2
1
2
2
Step Screw (quantity) Color Torque
4
M2.0×3.0mm,at-head,nylok-coated(9)
RJ45FRAMEtoMB&M/BSUBtoLOGICUP
SUB and KB SUP BKT
Black 2.0kgf*cm
When installing:
Makesurethattheconnectorsareattachedrmly.
Comentarios a estos manuales