Lenovo ThinkServer TD200 Manual de usuario descargar pdf (Pagina 21)

Chapter 3. Configuring the IMM

Use the links under IMM Control in the navigation pane to configure the IMM.

v From the System Settings page, you can:

– Set server information

– Set server timeouts

– Set IMM date and time

– Enable or disable commands on the USB interface

v From the Login Profiles page, you can:

– Set login profiles to control access to the IMM

– Configure global login settings, such as the lockout period after unsuccessful

– Configure the account security level

v From the Alerts page, you can:

– Configure remote alert recipients

– Set the number of remote alert attempts

– Select the delay between alerts

– Select which alerts are sent and how they are forwarded

v From the Serial Port page, you can:

– Configure the baud rate of serial port 2 (COM2) for serial redirection

– Specify the keystroke sequence that is used to switch between the serial

redirection and the command-line interface (CLI)

v From the Port Assignments page, you can change the port numbers of IMM

services.

v From the Network Interfaces page, you can set up the Ethernet connection for

the IMM.

v From the Network Protocols page, you can configure:

– SNMP setup

– DNS setup

– Telnet protocol

– SMTP setup

– LDAP setup

– Service location protocol

v From the Security page, you can install and configure the Secure Sockets Layer

(SSL) settings.

v From the Configuration File page, you can back up, modify, and restore the

configuration of the IMM.

v From the Restore Defaults page, you can reset the IMM configuration to the

factory defaults.

v From the Restart IMM page, you can restart the IMM.

Setting system information

To set the IMM system information, complete the following steps:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

Sin comentarios

Lenovo ThinkServer TD200 Manual de usuario Pagina 21