Lenovo ThinkServer TD200 Manual de usuario descargar pdf (Pagina 89)

Option Description

-d Assigned domain name

-dns1 Primary DNS server IP address

-dns2 Secondary DNS IP address

-dns3 Tertiary DNS server IP address

ifconfig command

Syntax

ifconfig eth0 [options]

options:

-state interface_state

-c config_method

-i static_ip_address

-g gateway_address

-s subnet_mask

-n hostname

-r data_rate

-d duplex_mode

-m max_transmission_unit

-l locally_administered_MAC

Description

Use the ifconfig command to configure the Ethernet interface. Type ifconfig eth0

to display the current Ethernet interface configuration. To change the Ethernet

interface configuration, type the options, followed by the values. To change the

interface configuration, you must have at least Adapter Networking and Security

Configuration authority.

The following table shows the arguments for the options.

Option Description Values

-state Interface state disabled, enabled

-c Configuration method dhcp, static, dthens (dthens corresponds to the try

dhcp server, if it fails use static config option on the

Web interface)

-i Static IP address Valid IP address format

-g Gateway address Valid IP address format

-s Subnet mask Valid IP address format

-n Host name String of up to 63 characters. Can include letters,

digits, periods, underscores, and hyphens.

-r Data rate 10, 100, auto

-d Duplex mode full, half, auto

-m MTU Numeric between 60 and 1500

-l LAA MAC address format. Multicast addresses are not

allowed (the first byte must be even).

Example

system> ifconfig eth0

-state enabled

-c dthens

-i 192.168.70.125

Chapter 7. Command-line interface 83

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 119 120

Comentarios a estos manuales

Sin comentarios

Lenovo ThinkServer TD200 Manual de usuario Pagina 89

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Lenovo ThinkServer TD200