Lenovo ThinkServer TD200 Manual de usuario descargar pdf (Pagina 88)

Description

Use the console command to start a serial redirect console session to the

designated serial port of the IMM.

Configuration commands

The configuration commands are as follows:

v dhcpinfo

v ifconfig

v ldap

v ntp

v passwordcfg

v portcfg

v slp

v srcfg

v ssl

v tcpcmdmode

v timeouts

v usbeth

v users

dhcpinfo command

Syntax

dhcpinfo eth0

Description

Use the dhcpinfo command to view the DHCP server-assigned IP configuration for

eth0, if the interface is configured automatically by a DHCP server. You can use the

ifconfig command to enable or disable DHCP.

Example

system> dhcpinfo eth0

-server 192.168.70.29

-n IMMA00096B9E003A

-i 192.168.70.202

-g 192.168.70.29

-s 255.255.255.0

-d linux-sp.raleigh.lenovo.com

-dns1 192.168.70.29

-dns2 0.0.0.0

-dns3 0.0.0.0

system>

The following table describes the output from the example.

Option Description

-server DHCP server that assigned the configuration

-n Assigned host name

-i Assigned IP address

-g Assigned gateway address

-s Assigned subnet mask

82 Integrated Management Module: User Guide

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

Comentarios a estos manuales

Sin comentarios

Lenovo ThinkServer TD200 Manual de usuario Pagina 88

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Lenovo ThinkServer TD200