Lenovo Secure Managed Client Manual de usuario descargar pdf (Pagina 42)

11. Align backplane screw holes with screw holes on boot drive module. Ensure

backplane connectors are aligned with the drive connectors on the boot drives.

Ensure the top of the circuit board is flush with the top of the boot drive

module. Secure backplane to boot drive module with two screws previously

removed.

12. Connect data cable(s) to the boot drive module backplane. The top boot drive

data cable connects to 1 in the following figure. The bottom boot drive data

cable connects to 2.

Figure 36. Installing upper boot drive

Figure 37. Attaching backplane to boot drive module

34 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Sin comentarios

Lenovo Secure Managed Client Manual de usuario Pagina 42