Lenovo THINKSERVER RD230 Manual de usuario descargar pdf (Pagina 54)

7. Remove the optical drive retention tab by removing the two screws that secure

the tab. Save the retention tab to use when you install a new optical drive.

8. If you are instructed to return the removed optical drive, follow all packaging

instructions and use any packaging materials that are supplied to you for

shipping.

9. To complete the removal procedure, go to “Completing the parts replacement”

on page 87.

Installing the optical drive

Attention

Do not open your server or attempt any repair before reading and understanding the Safety

Information and the Warranty and Support Information on the ThinkServer Documentation DVD

that comes with your product, and “Guidelines” on page 37. To obtain a copy of the

publications, go to:

http://www.lenovo.com/support

This section provides instructions on how to install the optical drive.

To install the optical drive, do the following:

1. If you are replacing the optical drive, make sure that:

v You have all the cables and other equipment that is specified in the

documentation that comes with the new optical drive.

v You have checked the instructions that come with the new optical drive to

determine whether you must set any switches or jumpers in the drive.

v You have removed the retention tab from the rear of the old optical drive

and have it available for installation on the new optical drive.

Note: If you are installing a drive that contains a laser, observe the following

safety precautions.

Statement 3:

Figure 13. Removing the optical drive retention tab

48 ThinkServer RD230 Types 1043, 1044, 4010, and 4011: Hardware Maintenance Manual

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 147 148

Sin comentarios

Lenovo THINKSERVER RD230 Manual de usuario Pagina 54