Lenovo ThinkServer TD100x Manual de usuario descargar pdf (Pagina 40)

1) Grasp the top of the plastic push pins and pull them out of the rivets

(close-up of pin 5 and rivet 6) .

2) Grasp the rivets and pull them out of the mounting holes and set them

to the side.

Note:

If the DIMM air duct in your server is secured with screws,

remove the screws.

Push the air duct up toward the rear of the power-supply cage. When the

locator pins 4 are free of the power-supply cage, you can remove the air

duct from the server.

c. Position the transition duct 1 so that the two tabs are directly over the

slots on the side of the DIMM air duct 3.

d. Slide the transition duct into the slots until it clicks into place.

9. Reinstall the DIMM air duct onto the power-supply cage.

10. Raise the power-supply cage slightly and press and hold the release tab on

the rear power-supply support bracket; then, lower the power-supply structure

into position.

11. Install the rear fan and fan structure on the chassis:

a. Align the clips on the rear fan assembly 1 with the holes in the chassis.

b. Slide the assembly toward the power-supply cage until it stops.

24 ThinkServer TD100 and TD100x Types 4203, 4204, 4205, 4206, 6398, 6399, 6419, and 6429: Installation Guide

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 123 124

Sin comentarios

Lenovo ThinkServer TD100x Manual de usuario Pagina 40